Lesa George

Instructions for Garage Door Installation

In this article, I will explain the garage door installation instructions. It is just a general idea; you should consult a user’s manual for the complete set of instructions. However, installing a garage door on your own is not as difficult as some many assume. It needs to be able to handle tools and follow the logical steps and assemble the sections in the right order. If you are not sure about your capabilities, call professional garage door services providers such as, Houston garage door supplier to manage your garage door for you.

You will need to have accurate measurements before starting your garage door project. It will help you determine what size of garage door you need. It should be written down so that you won’t forget the right measurement. First, take the length of the height and width of the garage door opening. It is a starting point to determine what your garage door size will be. The next step is determining the size of the “size-room”. It is the space from the side of the garage door to the wall at the same time. The vertical track of torsion and extension springs is going to need at least 3-3/4 from this space. If you want to install garage door extension springs, then you need an extra 5-1/2 space you put extension springs.

Garage Door

Your next measurement will be figuring out the size of the “head-room”. It is a room starting at the top of the garage door towards the ceiling of the garage. For example, you will need 10 to 12 inches of space if you have planned to install a torsion spring. If you run into a condition where you have short headroom, then there is special hardware that is designed to facilitate the restarted headroom. Remember you will need extra space if you have decided to install a garage door opener for automated functions of a garage door.

Now it is time to figure out the size of the “back-room”. It will be the space that measures from the garage door opening to the back of the garage wall. It should be calculated whatever the height of your garage door is and add another 18 inches. And definitely, if you have planned to put a garage door opener, then you need more space here.

After taking the accurate measurement, you are now ready to install the garage door. On the inside of the garage door opening you should have a wood frame of 2×6 jambs. The frame should match the height of the headroom you measured earlier. The frame should be balanced and plumb. The rotten frame should be replaced with the new one. Now come to the garage door sections. The bottom section must be prepared first. Collect your hardware and put them on the floor in groups. It is best accomplished on the sawhorse. This is where you need to follow the user’s manual.

Overall, it is a general garage door installation guideline. Every garage door comes with its own manual provided by the manufacturer. Hopefully, you have learned some tips about what may be involved if you are thinking of installing a garage door on your own. But never underestimate the importance of an installation manual.





Understanding the Basics of Garage Door Installation Services

Are you in need of garage door installation, it is always suggested to consult a professional garage door technician who has proper expertise and skills in this field? Many people hire professional garage door companies to help you in the garage door installation project. There are plenty of garage door companies that offer high-quality services at affordable rates. Are you looking for a garage door expert to assist your garage door project? Click on the website http://richmondvagaragedoors.com/garage-door-installation/ where you can access all the information about their services, quality of work, charges. Contact them to fix an appointment.

There are two primary garage door operating systems:

Are you need garage door installation, it is always suggested to consult a professional garage door technician who has proper expertise and skills in this field. Many people hire professional garage door companies to help you in the garage door installation project. There are plenty of garage door companies that offer high-quality services at affordable rates. Are you looking for a garage door expert to assist your garage door project? Click on the website where you can access all the information about their services, quality of work, charges. Contact them to fix an appointment to install your garage door.

  • The garage door torsion springs system consists of a drum and drum springs system which are manually wounded under tremendous pressure to balance the weight of the garage door while opening and closing process.
  • An extension spring system does not install with drums. At the same time, the system does not need a manually wounded structure. They are also responsible to counterbalance the weight of the garage door when it goes up and down.

The latest garage door models come with installation instructions provided by the manufacturer. It is always recommended that you carefully read the manual before doing anything for the garage door.  Let’s take a look at how the garage door installation process will proceed:

  • Each garage door comes with multiple sections which need to be assembled in the right order. It is suggested to get these components assembled to set them correctly. Working with a screwdriver on a sawhorse can prove to be beneficial. Remember, assembling the sections are a time-consuming process in the entire installation project. Well, working on a sawhorse can be a good option.
  • Once the setup is completed, you need to remove the old garage door (if any). First of all check the type of springs installed on the garage door, just to ensure a smooth and hassle-free installation process and working operations. It will help you in pulling out the old garage door springs and removing the old garage door. Make sure that the garage door frame and other things are not rotted or damaged at all.

  • The most important step of performing the garage door installation project is balancing the first section of the garage door with the frame because the remaining sections stack on the top of the first section. If the placement is off even by a few inches, then the garage door might come out crooked. Test the alignment of the garage door using a level to make sure that they are installed correctly.
  • After assembling the sections correctly, attach the first section to the frame of the garage door, and their corresponding rollers. In the next step, place the garage door opener and attach the spring, cables, and other safety accessories. Remember, garage door springs are dangerous to install so, be careful while working with them. Their stored energy can hurt or even kill you.

For different types of garage doors, separate installation processes have to be followed. In the USA, there are a lot of garage door companies that come across a wide variety of automatic overhead garage doors.






Garage Door Repair – Simple Things Need To Be Checked

Garage door repair projects may often be performed by ordinary people. There are a few important points that need to be checked before consulting a professional garage door company. Some garage door repair tasks are extremely easy and safer to conduct on your own. For example, a squeaky and loud garage door can be fixed with a good cleaning and lubrication. Other repairing tasks such as, replacement or adjustments of torsion springs are extremely dangerous and critical which should be handled by professional garage door technicians. Click here http://richmondvagaragedoors.com/ to learn more tips on garage door repair.

Before starting the project, make sure that you have unplugged the garage door opener so that you do not get an electric shock while working on your garage door. You may be standing on a ladder which is a really bad thing to get an electric shock; you may fall off the ladder. Don’t forget to wear safety gloves and glasses while working on the electric components of a garage door. Remember, you should have technical knowledge and understanding of garage door parts when you work on a garage door. Here is a list of things you need to check before calling a professional garage door technician.

  1. Inspect the tracks to find out the damages:

It is an easy and safe garage door repair work that may help you to solve garage door problems very fast. Sometimes, garage door tracks often may have bumps and dents. In case, you find such damages; straighten the damaged area of the tracks with the help of a rubber hammer and a piece of wood.

  1. Check the balance and alignment of the tracks:

In case, the tracks are not aligned correctly, they may result in malfunctioning of the garage door. It is not required to unscrew the track completely. You just need to lose the screws or bolts and tap the tracks gently to their original position. Test the alignment with the help of the level. Correctly aligned tracks allow you to be done with the working garage door in no time.

  1. Clean the tracks thoroughly:

Even though it may seem obvious but the accumulated dirt and hardened grease may be the cause of the stuck movement of the garage door. In this situation, your garage door repair project may consist of just cleaning the tracks. You may use any good household cleaner to wash the tracks and then dry them.

  1. Lubricate the tracks and rollers:

Just lubricating the rollers and tracks can fix the problems and get back the functionality of the garage door in no time. For oiling the garage door, you may use a light silicone spray or high-quality lubricant for this purpose. It is advised to lubricate the tracks right after cleaning them. Any moving hardware can get benefits from oiling.

  1. Tightening the loose hardware:

The moving hardware including screws and nuts can become loose with the passage of time. Try to examine the screws and bolts involved in the opening and closing process of the garage door. It is true that just tightening the loose components may solve the problems. If you are not able to tighten the screws just because of the bigger holes, then you may use “wood filler” to cover the gap of the holes.

What you cannot handle?

If you have tried every above-mentioned technique and none of them have worked, then the garage door springs are to blame. However, it is recommended not to attempt a garage door repair project if the problem seems to be the torsion springs. Unluckily, there have been many cases, where people suffered from serious injuries. However, if you are not sure, what to do with your non-working garage door. These tips will not cost you and fix the problems with your garage door. However, professional garage door repair companies will save you from injuries and troubles.



Information about Garage Door Springs

When an average person thinks about installing a garage door, the first and many times last thought which comes to mind is the style of the garage door. It is rare that anyone thinks about the garage door components and operating systems that keep the garage door working smoothly and correctly.

Among garage door parts, springs are the vital parts for any garage door. These springs are placed over the top of the side of the garage door. They can aid the garage door in the opening and closing process by counterbalancing its overall weight. They control the speed of the garage door at which it goes up and down. These springs work along with a series of metal cables to perform the actual functionality of lifting and lowering the garage door after a user begins the task of lifting the garage door. There are lots of things to consider when it comes to garage door springs that will make your life convenient to get the full functionality of the garage door. See more information at https://www.orlandogaragedoorpros.com/broken-garage-door-springs/

Many garage door manufacturers are producing garage doors that are easy to operate and need little maintenance services. Definitely, no garage door will work properly without good maintenance. Most garage doors are installed with torsion springs in either a single or dual setup. Lightweight garage doors need only one spring to work smoothly, however, two springs are inherently better because if one spring breaks down, the other can support the garage door to complete the operations.

Your garage door will go up and down smoothly if the springs are in a good working position and adjusted properly. The garage door should not take much effort to raise or lower on the metal tracks. In case, the garage door opens too quickly or a great amount of force must be exerted to operate the garage door, then it is time to replace the springs immediately. Installing and replacing the garage door springs is not a DIY-type project. These springs hold a great amount of tension which will be dangerous to handle on your own. Improper installation will make it hard to open or close the garage door. There is also a risk of injuries and damages. All of the above, there is also a chance the springs will have a limited life span because they will not be installed and work properly according to the specification mentioned by the manufacturer.

It is convenient to take for granted the structure of the garage door. Of course, it is really easy to not have to think about the maintenance of the garage doors on a daily basis. A well-functional garage door should open and close smoothly. However, it is prudent to spend a few minutes, every now and again to visually examine the garage door and its components especially the springs. It will be an easier and cost-effective way to ward off the problems before they become worst. Inspect the garage door springs in detail to find out the signs of wear and tear. Follow the manual’s instructions for the examination, maintenance, and lubrication of the parts of a garage door. Call a professional garage door technician to take of the loose or broken garage door springs.



Keeping Your Garage Door in Tip-Top Condition

The garage door is one of the most important and essential safety features around your house. However, people may take them for granted and neglect the garage door maintenance service until it is too late and you need to conduct a full-fledged expensive garage door repair service.

Thus, to avoid such annoying situations, where your garage door might be stuck while opening and closing or the garage door do not responding when you want to get out of the car urgently, you should take care of your garage door and opener to keep it in good working position. Before you start conducting the garage door inspection and maintenance service on your own, you should keep few important safety features in your mind.

  • When you start to inspect and service the garage door, keep your children and pets away from it
  • Keep your hands away from mounting and pressed hardware such as mounting brackets and springs
  • Take care not to get your hands stuck between the moving panels of a garage door as they can hurt you
  • Garage door maintenance service is effective when they are conducted out by the professional garage door technicians

Examine the garage door brackets and springs: Collect all required tools and products. Once you are ready with the needed tools and safety accessories, you should start your work by inspecting the garage door springs. Make sure that they do not have any sign of rust, damages, or signs being worn out. If your garage door is creating loud sounds, you just need to take care of it using any high-quality silicone spray or lubricant.

If cleaning and oiling do not solve the matter, you should call a professional garage door expert for further assistance. Remember that garage door springs are highly tensed parts of garage doors that need proper attention and care as they result in serious accidents and can cause fatal injuries. In the next step, proceed to inspect the mounting brackets that attach the garage door cables to the springs. These brackets can be adjusted easily but new automatic garage door models have tamper-resistant brackets which need to be adjusted or replaced by professional garage door technicians.

Garage door sensor maintenance: An automatic garage door is equipped with a safety sensors system that helps to prevent it from closing when there is something on the path of the garage door. These are the tiny electronic sensors placed at the bottom of the garage door near the ground. Make sure that these sensors should be free from debris, dust, and blockage so that they can always perform best and keep you and your family protected.

Check the springs and cables: Check the springs to find out the damages and cables for any frayed ends. If they have any sign of damages, deterioration replaces the cables as soon as possible otherwise they can cause serious accidents. Broken garage door springs should be replaced with the help of a professional garage door technician because they are extremely dangerous to handle.

Other odd jobs: Other garage door maintenance tasks including replacing the batteries in the remote, shifting the opener around the wall, tightening the loose hardware, lubricating the dry components, checking the weather stripping, and inspecting the weather stripping around the garage door should be performed while you are servicing your garage door.



Tips on DIY Garage Door Spring Replacement

It is likely that you have a malfunction or worn-out torsion springs on your garage door and you might be thinking about replacing the torsion springs on your own. If you have mechanical skills, you can handle such projects and save a costly service call.

But you should be able to find the right replacement parts and understand the procedure of the work. Another important thing that needs to be determined is whether your garage door has extension springs or torsion springs. Extension springs are easier and safer to handle than torsion springs. They are fully loaded coil devices that are capable to manage 500 pounds weight. If they become weak, they can burst at any time and can hurt anyone around them. While extension springs are wound-up coils that contract or expand when the garage door opens and closes.

Once you have determined the type of springs you have with your garage door, you can find the right replacement parts quite easily on the internet. There are plenty of authentic websites that specialize in garage doors and will often provide tutorials about instructions on garage door spring replacement. You should follow safety measurements while replacing garage door springs, make sure that you have protective eyewear, hands gloves, and keep small kids away from the area. Any silly mistake can result in a serious accident especially in the case of torsion spring. If you have any doubt about your skills, it is better to call garage door specialists like Fayette County garage door spring repair services to replace the broken spring.

Avoid buying garage door springs from stores that may have few options to choose from. They might not have a knowledgeable salesperson to guide you. Internet is the best solution because there are plenty of websites that offer a wide variety of springs and have experts to help you according to your needs. If you are thinking of handling this project on your own, you will have to order these parts and there will be step-by-step instructions to do this process. You will have to arrange the tools that you will need to complete the project.

Online videos might be a good option for those that find the written instructions difficult to understand. There are several websites that offer online videos on this process. Actually, there are many websites that feature instructional diagrams, videos, and articles to make it easier to choose the right part. They show you how to replace the broken garage door spring correctly and safely.

If you want to hire a professional garage door technician to tackle the garage door spring project, I advised you to hire a local garage door company that is reputable, experienced, and certified, so the internet is a great source for finding them. There are many answers you can find on the internet when you are trying to find out the right products or services that you need for your garage door. it is just a matter of following helpful techniques to take an effective decision.



Hiring a Garage Door Repair Professional

Most of us don’t plan ahead to meet the cost of garage door repair. It is also true that a large number of homeowners find themselves in need of it at least one time.

In this article, I will give you a helpful guideline for hiring a professional garage door technician to conduct this job. It is an essential step, especially if you use it frequently because extreme pressure on garage door parts can become worn out. Whether it is structural damages or mechanical failure, there is a good chance that you will need a professional garage door contractor to deal with it for you. You should spend enough time to carefully consider who you hire to perform this task and make sure that you will be happy with the results in a long term. The best New Haven garage door repair company has trained and experienced technicians. They are properly qualified, trained, honest, and reliable to perform garage door repair and maintenance tasks.

Problems with your garage door:

Definitely, the first action that you will need to perform is to inspect the garage door to find out the exact problem. Do you need to repair the garage door due to its damages or its automatic garage door opener is not working properly? Is it malfunctioning due to more than one issue? Before calling a garage door expert, you should determine exactly what you need, so you will ensure that you have chosen a garage door company with the right skills.

Finding the right garage door companies:

If you have friends or colleagues who have had avail these services, ask them for recommendations. In addition to this, you may use yellow pages or the internet to find out garage door experts near you to make a list that looks promising excellent services. Call them one by one and ask pin-pointed questions about their concerns including experiences, qualifications, and cost of projects. If they do not show any interest while answering your concerns, cross them off from the list. Before hiring any expert, you should verify that they are properly certified, bonded, and registered. Don’t forget to check their references and feedbacks.

Regular garage door maintenance:

Once garage door problems are fixed, you want to do something to make sure that it stays in a good working position. If you experience any problem with the garage door before the guarantee expires, call professional garage door experts who will do the right job for you. Other than that, you will have to practice any type of garage door maintenance activities that will keep your garage door in a good working position, such as keeping mechanical components lubricated, tightening the loose hardware, and installing the bumpers to prevent car damages.

As long as you spend time to choose wisely when it concerns who will conduct the garage door repair project, you will be satisfied with the results in a long run, hopefully as long as it stays for you. You should even make some addition to make your garage door safe to use. If something to consider, it could save your money if you combine the garage door repair and maintenance project at a time instead of having them done separately. But choosing a professional garage door expert is essential.




Ideas for a New Garage Door Installation

If you are planning for installing a new garage door, the recommendation that you will hear the most is to make sure you have to consult a professional to do the job for you. Most garage door companies will limit their warranty on their products if you carry out the installation work on your own.

Even though you have done a similar project previously in your life, you will have to read the fine lines of any warranty or guarantee before doing anything. In addition to this, would not you feel comfortable knowing that your garage door was installed perfectly by a professional garage door company like, Greenwich, CT garage door installation with proven skills and techniques? If anything went wrong (which is probably impossible) does it not feel good knowing that you got faulty things covered.

Know and determine what you are doing?

Installing a garage door is a complicated process; you will have to need somebody to help you if you are going to conduct a garage door installation project on your own. But it can be really frustrating or annoying if you plan on installing a garage door on your own. The next most frustrating step about the garage door is installing a spring. It is not an easy process, in fact, it can be extremely dangerous. A garage door with wrongly installed springs will not function properly. A garage door spring is not something to be messed around with it if you do not know what you are doing with it. Let a professional do what is necessary for it. These springs have a tendency of snapping back at your head, causing them to pinch even if you are an experienced person. This is another reason to let a professional do the garage door installation job.

Choosing the best for you:

While choosing a new garage door for you, there should be careful planning. If you have attached a garage, then it will the largest entry point into the home, thus security must be considered as an important point. A faulty or malfunctioning garage door can cause you to feel uncomfortable when you are away or if you are asleep. Don’t leave your garage door unattended. If you want to install a new garage door, don’t hesitate to consult a professional to get one as soon as you possibly can.

Safety and security of garage door:

Choosing a garage door with regards to its design, style, and security is an important task. But don’t forget about the safety features that come with every garage door. It is also important to learn how to maintain, operate, and adjust the garage door. Garage door maintenance will only make your garage door last longer for years to come.

Make your all family members know how to operate the garage door correctly. There is a lot of things to know than just knowing how to open or close the garage door.  Every garage door comes with its own user’s manual. Make sure you read it before a professional garage door installer completes the work. It is up to you to ask relevant questions.


Installing a Garage Door Spring Safely

Accidents related to overhead garage doors are reported for approximately 30,000 injuries cases every year, according to the USA Consumer Product Safety Commission.

These cases include amputations, fractures, broken bones, and even crushing under the garage door that could lead to further problems like death. The most important but hazardous element of the garage door is its spring. It means if you either choose to do a DIY garage door repair work or want to hire someone do it professionally. There are several safety precautions that must be considered when it concerns garage door spring installation. Hiring a reputed and certified garage door company such as, Greenwich, CT garage door repair is a wise decision.

Old versus new garage door springs: Nowadays garage door springs have a core rod inside the coil of spring, unlike old springs. This is why old garage door springs are considered risky and dangerous. In the case of installation, they are expected to throw off steel shrapnel inside and outside the garage. The flying pieces of springs can damage your body or car. Due to the core rod in the recent designs of springs, the broken chinks of material will retain in the rod in case of installation failure. Definitely, you go with the new springs. Visit your local garage door retailer to observe the difference between the two.

Types of springs: The recent type of garage door springs is the “torsion springs” system which may involve either one or two springs. These springs are wound up on a metal rod and placed on the header of the garage door. Maximum tension is generated when the overhead garage door travels down. If garage door spring breaks under such stressed conditions, it could be extremely dangerous. If you want to operate the garage door manually when a malfunction happens, you should follow a couple of things:

  • Don’t try to stop it from falling down
  • Let it go and quickly jump away from it
  • Make sure anyone is not where the garage door slams

In the case of dual springs, if one breaks, the other takes the responsibility to aid the garage door. Both springs should be replaced together. Having a new spring with an old spring will increase the risk of damages. Extension springs are an older model of a garage door. When extension garage door springs were introduced, they were once an efficient component in a garage door. They are used to assists the garage door in the opening and closing process by counterbalancing its overall weight. Anyone who has this system will notice how risky the system works. It is one of the major reasons that they are no longer in use. A solution comes in the shape of safety cables.

Garage door cables: These safety cables are manufactured with the light material. If spring breaks its chunks go ballistic but within a certain range where you have installed the safety cables. You can install garage door cables yourself after checking the material and measurement of your system.



all a Professional Garage Door Technician for springs

Before starting garage door spring repair or replacement, you should be aware of a few important things. This part of the garage door is under a lot of pressure. If they snap there is a possibility that they can cause serious injuries and damages.

The best thing to do with the broken or weak spring, especially if you are not experienced in handling these types of projects is to call a professional garage door technician. They are specially educated and trained and equipped with special tools and equipment required to fix or replace the springs.  For more information, please click here.

Garage door springs are placed on both sides of a garage door. Even if you are having trouble with one of them, replacing both of them is recommended. If one spring breaks, the other will likely follow it shortly. Even heavy-duty springs are good for approximately 10,000 operating cycles before they need to be replaced.  Some garage door springs are extensions while others are looped to torsion springs. Garage door torsion springs are commonly used in the latest garage door models.

New springs are not going to be easy to find in a market for an ordinary person who is not engaged in the business of garage doors. It is another issue that an ordinary person will run into while conducting a garage door repair or replacement project. If you successfully find the right ones, you will likely pay far more to buy them because manufacturers do not allow you to sell this product to end-user. They are advised to sell them to the authorized dealer in order to prevent problems.

If you are determined to find and buy a spring and perform the replacement task on your own, you will probably be in for an extensive search. Finding the right type, size, and material of spring is not going to be easy. These measurements should be exact as there are several types of springs available in the market under each category. Make sure the size of the inside wire, the length, and the inside diameter of the new part will be counted in the measurement of springs.

In the case of torsion springs, there are two mounted on each side of the garage door. The measurement of the spring cannot be off even by a little because each one is particularly designed according to the weight of the garage door on which they are installed. The amount of stress is also determined because it needs while opening and closing the garage door.

In addition to this, when you have decided to replace the springs on your own, if something is not done correctly or does not function properly afterward, you must restart all the work. It can be a costly process. When you hire an expert to conduct this type of project, the work should be guaranteed. It is one of the important points that you will want to confirm before hiring professional garage door services.

The parts and services provided by them are guaranteed as well. It means that if something goes wrong in a few days and your garage door is not working smoothly, they will come back and fix the issue without charging you. Therefore, the cost that is incurred when must be fixed or replaced is probably going to be less if you hire a garage door company that specialized in this field.