In this article, I will explain the garage door installation instructions. It is just a general idea; you should consult a user’s manual for the complete set of instructions. However, installing a garage door on your own is not as difficult as some many assume. It needs to be able to handle tools and follow the logical steps and assemble the sections in the right order. If you are not sure about your capabilities, call professional garage door services providers such as, Houston garage door supplier to manage your garage door for you.
You will need to have accurate measurements before starting your garage door project. It will help you determine what size of garage door you need. It should be written down so that you won’t forget the right measurement. First, take the length of the height and width of the garage door opening. It is a starting point to determine what your garage door size will be. The next step is determining the size of the “size-room”. It is the space from the side of the garage door to the wall at the same time. The vertical track of torsion and extension springs is going to need at least 3-3/4 from this space. If you want to install garage door extension springs, then you need an extra 5-1/2 space you put extension springs.
Your next measurement will be figuring out the size of the “head-room”. It is a room starting at the top of the garage door towards the ceiling of the garage. For example, you will need 10 to 12 inches of space if you have planned to install a torsion spring. If you run into a condition where you have short headroom, then there is special hardware that is designed to facilitate the restarted headroom. Remember you will need extra space if you have decided to install a garage door opener for automated functions of a garage door.
Now it is time to figure out the size of the “back-room”. It will be the space that measures from the garage door opening to the back of the garage wall. It should be calculated whatever the height of your garage door is and add another 18 inches. And definitely, if you have planned to put a garage door opener, then you need more space here.
After taking the accurate measurement, you are now ready to install the garage door. On the inside of the garage door opening you should have a wood frame of 2×6 jambs. The frame should match the height of the headroom you measured earlier. The frame should be balanced and plumb. The rotten frame should be replaced with the new one. Now come to the garage door sections. The bottom section must be prepared first. Collect your hardware and put them on the floor in groups. It is best accomplished on the sawhorse. This is where you need to follow the user’s manual.
Overall, it is a general garage door installation guideline. Every garage door comes with its own manual provided by the manufacturer. Hopefully, you have learned some tips about what may be involved if you are thinking of installing a garage door on your own. But never underestimate the importance of an installation manual.