Techniques to Replace and Adjust Garage Door Springs

Knowledge of garage door spring replacement and adjustment is as important as taking care of the whole garage door. Although garage door springs are not as big as garage door openers they are used as an essential part that makes the garage door function.

There are two types of springs that are installed on the garage door. They are torsion and extension springs. The torsion springs are mounted on the metal shaft rod that is positioned above the garage door opening and parallels to the top frame of the garage door. The other type is extension garage door springs that are side-mounted devices. They are side-mounted springs that are stressed for the smooth lifting when the garage door operates and performs the same functions as the torsion springs did. Due to the great amount of energy stored by the springs, they are extremely dangerous to adjust and install, so it is strongly suggested that hire a professional garage door company like, Minneapolis garage door spring replacement services to do this job for you.

The right way to adjust the tension of garage door springs is to replace the springs as a set. The continuous usage of springs will decrease their strength and life. This is why it is not recommended to use a new spring and old spring altogether as they cause rough and imbalance movements of the garage door. So, if you are using two springs on your garage door, it is suggested not just replacing the busted spring but the old ones as well. It is highly suggested that use professional and certified garage door services in order to efficiently install and adjust the garage door springs. Remember that garage door springs adjustment can be a dangerous task and should not be taken for granted.

Garage door spring replacement is not something exciting to learn about. These springs are used to provide us with good working services. Every time you open and close the garage door, the highly tensed garage door springs aid the garage door to lift and lower safely while balancing the weight of the garage door.

It means that they are placed under a lot of pressure at all times. It is also good for safety reasons that you should always inspect the springs before they snap and break out. Garage door springs are used both on manual and electronically operated garage doors. They are normally usable for about 10,000 operating cycles before they need to be replaced. If one of the springs break, the other one is likely to fail soon so get them both changed at the same time, if possible.

 Garage Door Spring

It is extremely easy to determine which type of springs you are using on your garage door by just looking at where they are. If you have any confusion, make sure you have called for a professional garage door assistance to look at the broken garage door springs as soon as possible.